Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in South Highpoint, FL
Gate installation in South Highpoint usually means one of two things: a new automatic driveway gate on a mid-century concrete-block home, or a yard-access gate on a manufactured-home lot where the post has started to lean. We install both, and we have been doing it in the 33760 ZIP since 2013. The work here is different from most of Pinellas County because the soil is sandy, the lots are tight, and the humidity eats uncoated steel faster than you’d expect. Call Kingston Gate Repair at (877) 752-3303 for a free estimate on a gate that’s built for this specific patch of Florida.
Why South Highpoint Homes Are Different
South Highpoint is an unincorporated Pinellas County pocket wedged between Clearwater, Largo and St. Pete. That one fact changes the job. When we pull a permit for a new gate or a structural repair, it goes through Pinellas County’s building department, not a city hall down the street. The inspection timeline and the paperwork are county rules, and a homeowner who has never done it before can get tangled up fast. We handle the permit side as part of the job because we have done it enough times to know what the county reviewer looks for.
The housing stock is mostly 1950s to 1970s concrete-block and wood-frame homes, plus a heavy share of manufactured housing. On the older places, we routinely find gate posts that were set shallow in sandy fill and have started to heave after a few rainy seasons. A gate that swings fine in January can drag by August because the post moved half an inch and threw the hinge geometry off. Newer manufactured-home lots have their own quirk: the fence line is often close to the structure, so a slide gate is sometimes the only layout that actually fits.
Salt-laden air off the Gulf and high summer humidity accelerate corrosion on bare steel and cheap powder-coat finishes. We spec aluminum or galvanized steel with a marine-grade finish on anything that will live within sight of the water, and we treat every hardware set as a ten-year investment, not a five-year one.
Styles & brands we work with
Our Main South Highpoint Services
Most calls we take from South Highpoint fall into two buckets: a gate that has stopped working, and a gate that stopped working because electricity or electronics failed. We cover both with dedicated teams.
Gate Repair in South Highpoint
When a swing gate starts scraping, a slide gate jumps the track, or a post has tilted enough to make the latch useless, the fix usually involves more than a new hinge. On South Highpoint’s sandy lots, we often re-set the post in a deeper concrete footer before we re-align the gate, because replacing hardware on a moving post just buys you a few months. We carry hinge sets, rollers, V-track, cantilever hardware and latch assemblies for most common residential gates, which means we can diagnose and repair in one visit more often than not. Gate Repair in South Highpoint covers everything from a sagging manual gate to a broken post weld.
Electric Gate Repair in South Highpoint
Automatic gate operators fail in predictable ways in this climate: a control board that gets cooked by a lightning-adjacent surge, a limit switch corroded by humidity, or an actuator that has been working against a gate that stopped rolling freely months ago. We service LiftMaster, FAAC, BFT, Mighty Mule, and the rest of the brands on our supported list, and we carry control boards and capacitors for the common models. A South Highpoint electric gate that won’t open is a security problem and a daily-access problem at the same time, which is why we treat it as a priority call. Electric Gate Repair in South Highpoint covers the operator, the wiring, the safety loops, and the access controls.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in South Highpoint
A new gate on a South Highpoint property has to survive two things the national catalogs never mention: the summer rainy season that softens the sandy ground under the posts, and the salt-air humidity that finds every uncoated piece of hardware within months. When we install a gate here, we dig the footers deep enough to get below the heave zone, we use galvanized or marine-grade hardware throughout, and we set the post spacing to match the gate layout on that exact lot, not a generic template. Gate Installation from Kingston Gate Repair covers manual and automatic layouts, swing and slide, for homes and small commercial lots along US 19 and the surrounding streets.
Automatic Gate Installation
Signs you need it
You have a manual gate you open by hand several times a day, or you want a gate that closes itself behind you for security.
What it costs in South Highpoint
A full automatic gate installation in South Highpoint typically runs $1,100 – $3,600, depending on the gate material, operator brand, and electrical work involved.
How we do it
We set the posts and hang the gate first, then mount the operator, run the power and safety-loop wiring, and program the open/close limits to your specific gate travel.
Driveway Gate Installation
Signs you need it
Your driveway opens straight onto a busy road or you want a defined boundary that keeps vehicles from using your lot.
What it costs in South Highpoint
Expect $1,200 – $4,000 for a driveway gate in the 33760 area, with slide gates on the higher end because of the track and hardware.
How we do it
We measure the exact driveway width and set-back, recommend a swing or slide configuration based on the slope and available space, then build and hang the gate on freshly set posts.
What Gate Installation Costs in South Highpoint
| Item | Typical range in South Highpoint |
|---|---|
| Manual driveway gate (single swing) | $1,100 – $2,600 |
| Automatic driveway gate (swing, incl. operator) | $1,600 – $3,600 |
| Sliding gate (manual or automatic) | $1,400 – $4,000 |
Does a South Highpoint gate installation need a county permit?
Yes, for most permanent gates and automatic operators in unincorporated Pinellas County. The county reviews post footings, electrical work, and set-backs. We file the permit as part of the installation and schedule the inspection so you don’t have to chase the paperwork yourself. Call (877) 752-3303 and we’ll confirm what your specific project needs.
How long does a gate installation take in South Highpoint?
Most single driveway gates go from permit approval to final inspection in 2 to 5 days of on-site work. Concrete pours need a day to cure, and the county inspection adds time beyond our control. We’ll give you a written schedule before any work begins, and the price is locked at that point.
Brands We Service in South Highpoint
We support repair and installation across LiftMaster, FAAC, BFT and Mighty Mule operators, among others. For South Highpoint jobs we keep common control boards, limit switches and safety-edge components on the truck so we aren’t saying “part’s on order” when the gate is dead. See our brands for the full list of supported equipment.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in South Highpoint, FL
| Service | Typical range in South Highpoint |
|---|---|
| Gate repair (basic service call and adjustment) | $120 – $250 |
| Gate repair (major, incl. new hardware) | $300 – $800 |
| Electric gate repair (control board replacement) | $250 – $600 |
| Electric gate repair (actuator or operator replacement) | $500 – $1,500 |
| Automatic gate installation | $1,100 – $3,600 |
| Driveway gate installation | $1,200 – $4,000 |
| Sliding gate installation | $1,400 – $4,000 |
| Gate operator installation | $500 – $1,800 |
In South Highpoint, prices climb when a post has to be dug out and re-set in deeper concrete, or when a gate that has been scraping for a year has already bent the hinge tabs and chewed the operator gears. The quote we give you before any work starts is the price you pay. No surprise line items after the gate is hanging.
Neighborhoods We Serve in South Highpoint
We cover all of the 33760 ZIP including the residential streets west and east of US 19, the manufactured-home communities along the connector roads, and the small commercial properties that line the highway side. Most calls in South Highpoint can be scheduled within one to two business days, and electric-gate emergencies get priority handling because a dead operator means a vehicle stuck inside or outside.
- Residential streets west of US 19
- Residential streets east of US 19
- Manufactured-home communities off the connector roads
- Small commercial lots along US 19
Service Area – Cities Near South Highpoint
We regularly send technicians from South Highpoint out to the surrounding Pinellas communities. Pinellas Park, FL is five minutes away and has the same sandy-soil post issues we see here. Feather Sound, FL runs into more of the salt-air corrosion and larger estate gates. Gandy, FL and Lealman, FL are both quick runs for us, and the same county permitting rules apply.
Serving South Highpoint, FL — Our Local Coverage Area
We’re based in the South Highpoint area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in South Highpoint
Yes. For installations and structural repairs in unincorporated Pinellas County, we handle the permit application, the county inspection scheduling, and the final sign-off as part of the job. You get a copy of everything. The price you are quoted includes our time doing the paperwork.
For non-emergency repairs and installations, we schedule within one to two business days across the 33760 ZIP. For electric gates that won’t open and are blocking a vehicle, we treat it as a priority call and move it to the front of the schedule. Call (877) 752-3303 and tell us what the gate is doing, and we’ll give you an honest answer on timing.
Some of the manufactured-home communities in the 33760 ZIP have their own covenants about fence and gate height, finish, and setbacks, and those rules run alongside the county permit. We ask about HOA or community approval during the estimate so we don’t build a gate that gets flagged later. If you have a copy of the rules, bring it to the first visit.
If your South Highpoint gate is sagging, seized, or just won’t open, call Kingston Gate Repair at (877) 752-3303 for a free estimate. We’ll tell you what’s wrong, what it costs to fix, and we’ll do the work right the first time.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What South Highpoint Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Maya Rao"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Carrie Sullivan"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Rosa Garcia