Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Installation for Tampa Homeowners
A new gate changes how your property works. It controls who gets in, keeps kids and pets off the street, and closes off the back of the property. Kingston Gate Repair installs manual and electric driveway gates across Tampa, and we’re the company other contractors call when a gate job goes sideways. Brent Holloway built this business around one idea: a gate specialist should know your exact operator before the truck pulls up. We work on LiftMaster, FAAC, BFT, and Mighty Mule systems every week, so we diagnose quickly and quote honestly. Call (877) 752-3303 for a free, no-obligation installation estimate anywhere in Tampa.
Automatic Gate Installation
Automatic Gate Installation means adding a motor, control board, safety loops, and power run so your gate opens and closes without you leaving the car. It’s a bigger job than bolting on an opener because the foundation post, hinge alignment, travel limits, and safety sensor loop all have to work together. Gate Installation in Tampa benefits properties with long driveways, pool enclosures, or short-term rentals most. We install automatic gates for both residential and light commercial sites, and a typical driveway automatic gate package starts around $3,800 and runs up from there depending on gate size, operator horsepower, and whether you want keypad or intercom entry.
Safety Loop and Sensor Integration
An automatic gate without working safety loops is a liability. We bury loop detectors in the driveway, test the reverse function, and calibrate the close timer so the gate never closes on a car or a person.
Operator Selection, Matched to Your Gate
We don’t sell you the brand we happen to stock. We spec the operator to the gate’s weight, daily cycles, and wind exposure, then wire it for whatever access system you want, from a basic keypad to a full intercom.
Styles & brands we work with
Gate Installation Services
Gate Installation Services cover everything from a single swing gate across a residential driveway to a double-leaf commercial entry with card readers. Some customers know exactly what they want. Others have a rough idea and need someone to walk the site, look at the setbacks, and say what actually works. We do both. Kingston Gate Repair provides full site assessment, grading, concrete work for hinge posts, gate build or assembly, and operator wiring. Most Tampa homeowners spend between $2,500 and $7,000 on a new manual gate, and anywhere from $4,500 to $12,000 on a motorized system with access control; for details, see our Gate Installation pricing.
Site Walk and Design Advice
Before any materials get ordered, we walk the property. Driveway slope, gate swing direction, post depth, and clearance for delivery trucks all influence the design. We tell you what will last and what will bind.
Concrete, Posts, and Hardware
We dig, set, and pour the hinge posts ourselves. Square and plumb posts are the difference between a gate that swings true for 15 years and one that sags in 15 months. Hinges, drop rods, and the latch are all rated for the gate weight.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation
Electric Gate Installation is our core trade, not an add-on. An electric gate includes a motor, actuator or ram, control board, power supply, safety edges or loops, and the conduit run from your panel to the gate. East Lake-Orient Park Gate Installation and other Tampa properties that sit on busy roads or back up to alleys often need one. We run the power, mount the operator, program travel limits and force settings, and test the full cycle count. Electric gate projects in Tampa typically range from $5,000 to $14,000, depending on whether it’s a single swing, a slide gate, or a double-leaf entry with intercom and remote controls.
Control Board Wiring and Programming
The control board is where most DIY jobs fail. We program the open and close limits, set the obstruction sensitivity, and wire the accessory inputs so the gate responds the same way every time, not half the time.
Power Run and Code Compliance
We run conduit from the panel to the gate location, size the wire for the distance, and install a proper disconnect. Electric gate code in Florida matters, and we build to it from day one.
Driveway Gate Installation
Driveway Gate Installation is what most Tampa homeowners call us about first. A driveway gate does double duty: it screens the front of the property from the street and it stops uninvited cars from pulling up to the house. Single gates work on most standard Tampa driveways. Wider double driveways need a double-leaf setup with a center stop post. We schedule a site visit, measure the actual opening, check the ground slope, and recommend a Egypt Lake-Leto Gate Installation or other gate type that won’t drag or bind. A standard single swing driveway gate with manual operation starts around $2,200, and a double-leaf electric driveway gate package starts near $6,500.
Single and Double Swing Options
A single swing gate needs less hardware and costs less. A double swing opens faster and looks better on a wider driveway. We explain the maintenance tradeoffs of each before you spend a dollar.
Matching the Gate to Your Entry
Steel tube, aluminum, ornamental iron, or a solid privacy panel, each has a different weight and wind profile. We match the gate style to the posts and the opener capacity so the system doesn’t fight itself.
Sliding Gate Installation
Sliding Gate Installation is the right call when the driveway slopes up toward the house or when there’s no clearance for a swing gate to arc open. A slide gate rides on a track and rollers, or on a cantilever system that holds itself up without touching the ground. Tampa properties built on a grade often need a slide gate where a swing gate would scrape. Cantilever slides are the better choice for steep or uneven driveways. Tampa slide gate installs run from $7,000 to $16,000, depending on gate length, track versus cantilever, and whether the operator mounts at grade or on a pad.
Cantilever versus Track Systems
A track slide is simpler and cheaper, but the track needs a flat, clean surface to roll on. A cantilever slide floats above the driveway, so debris, dirt, and minor grade changes don’t stop it. We’ll tell you which fits your site.
Roller Alignment and End Stops
Cantilever gate rollers have to be shimmed and aligned, not just bolted on. We set the roller spacing and end stops so the gate travels level, doesn’t rack, and stops dead every time.
Gate Opener Installation
Gate Opener Installation can mean two very different jobs. It might be a new opener on a gate you already have, or the opener component of a brand new electric gate install. Both start with the same question: what’s the gate weigh and how many times a day does it cycle? We install LiftMaster, FAAC, BFT, and Mighty Mule openers, and we program them to the gate’s specific weight and travel length. Retrofitting an opener to an existing manual gate in Tampa runs about $2,800 to $6,000, depending on whether we’re adding safety loops, a keypad, and a power run.
Retrofit to an Existing Gate
Not every existing gate is worth retrofitting. If the hinges and posts are solid, we can add an opener, wire access devices, and program the board. If the gate is sagging, we’ll say so before we sell you a motor.
Force Settings and Emergency Release
An opener that pushes too hard is dangerous. We set the force sensitivity so the gate stops on an obstruction, and we show you exactly where the emergency release is and how to use it when the power goes out.
Gate Fabrication
Gate Fabrication covers building a gate to a specific width, height, and design when an off-the-shelf gate won’t fit. Some Tampa properties have odd opening widths. Others want a heavier frame, a privacy panel welded in, or a specific spacing between pickets that stock gates don’t offer. We fabricate steel and aluminum swing and slide gates to your measurements, then install them ourselves. Fabrication jobs in Tampa start around $2,000 for a simple steel tube gate and climb to $8,000 or more for oversized or custom-privacy designs, depending on materials, finish, and whether automation gets added.
Custom Widths and Odd Openings
An 11-foot opening doesn’t match a 10-foot stock gate. We measure the actual daylight opening, build the gate to fit with the right hinge clearance, and you don’t end up with a filler panel that looks like an afterthought.
Material Choice and Finish
Powder-coated steel and aluminum hold up in Tampa’s humidity and salt air, but they need different frame thicknesses for rigidity. We recommend a material that matches your fence and your maintenance tolerance, then weld or bolt the frame accordingly.
Brands We Service
LiftMaster is the operator brand we see most often on Tampa residential gates. Their swing and slide openers are dependable, but the factory travel-limit and force settings often need recalibration after installation or a power surge. We stock LiftMaster control boards, remotes, and safety edges, so most service calls finish in one visit.
FAAC and BFT are professional-grade hydraulic and electromechanical brands, common on larger estate and commercial gates. They cycle harder and last longer when installed right, and they require more setup discipline. We program FAAC and BFT boards from scratch and we know their obstruction sensitivity and encoder faults well enough to diagnose over the phone.
Mighty Mule is the entry-level opener a lot of Tampa homeowners buy at the big box store. They’re simple and workable, but they are often under-sized for the gate they’re bolted to. When a Mighty Mule gets installed on a gate that’s too heavy, it burns through capacitor boards. We’ll tell you honestly whether your Mighty Mule is a keeper or a stopgap.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- The gate drags or scrapes at the free edge. That’s usually a post that has shifted or hinges that have worn. If the post keeps moving, the gate will eventually bind against the opener and burn out the motor.
- The opener runs but the gate barely moves. This usually means a stripped drive gear, a failed capacitor, or a gate that has gained weight from a modification. Running it this way damages the board the longer it goes.
- You hear a grinding or clicking each cycle. Grinding says a roller or hinge is fighting. Clicking often points to a relay or a low battery in the control box. Either one gets worse if ignored.
- The gate reverses mid-cycle for no reason. That’s the safety system doing its job, usually because a loop detector is failing or the force setting is too sensitive. A gate that won’t stay closed means the property isn’t secured.
- You have to get out and push the gate. A gate doesn’t suddenly become manual. When the automation quits, it’s a board, a limit switch, or a power issue. Bypassing it by hand is temporary; the underlying fault is still there.
Our Process, Step by Step
- 1
Site visit and measure. We walk the property, measure the opening, check the grade and post condition, and listen to how you use the gate every day. You get a written plan before anything is ordered.
- 2
Recommendation and written quote. We tell you what we’d install if it were our house and why, then give you a line-item price. If a repair would serve you better than an installation, we say that too.
- 3
Order and fabrication. Gates and hardware get ordered or fabricated to your measurements, not adapted from a stock size. This usually takes one to three weeks depending on material and finish.
- 4
Installation and programming. We set the posts, hang the gate, run the power, mount the opener, and program travel limits, force settings, and all access devices. The gate cycles several times while we fine-tune it.
- 5
Walkthrough and cleanup. We show you how the manual release, keypad, and remotes work, clear the site, and leave you with the manual and our number if anything ever feels off.
How Much Does Gate Installation Cost in Tampa?
Gate installation in Tampa isn’t one price, it’s a range. A basic manual swing gate on an existing fence line starts around $2,200. A mid-range electric single swing gate with a LiftMaster or Mighty Mule opener, safety loops, and a keypad tends to run $5,000 to $8,000. A full double-leaf automatic entry with a FAAC or BFT operator, intercom, and cantilever slide setup can reach $16,000 or more. The big cost drivers are gate type, gate width and weight, whether we pour new posts, the operator brand, and the access control you want. Here’s what to expect:
| Project Type | Typical Tampa Price Range |
|---|---|
| Manual single swing driveway gate | $2,200 – $4,500 |
| Manual double swing gate | $3,500 – $7,000 |
| Electric single swing gate with opener | $5,000 – $9,000 |
| Electric double swing gate with access control | $7,500 – $14,000 |
| Sliding cantilever gate with operator | $7,000 – $16,000 |
| Opener retrofit to existing gate | $2,800 – $6,000 |
| Custom gate fabrication (materials and labor) | $2,000 – $8,000+ |
The price on your written estimate is the price you’ll pay. We quote before we order materials and before any work starts, so there are no surprise change orders afterwards. A few things that push cost up: gates wider than 14 feet, sites with a steep grade, existing posts that need replacement, and perimeter access systems like intercoms or card readers. If you want to avoid overpaying, get a quote that itemizes the gate, the operator, the power run, and the access devices separately, not one lump number. Our estimates break out every component. Call (877) 752-3303 and we’ll give you an exact number for your setup.
Our Service Area Near Tampa
Kingston Gate Repair installs and services gates across Tampa and the surrounding communities. We work regularly in Tampa, Egypt Lake-Leto, Carrollwood, Carrollwood Village, Lake Magdalene, University, Temple Terrace, Town ‘n’ Country, Progress Village, Gibsonton, and Palm River-Clair Mel. Our trucks are already on these roads weekly, and we schedule in blocking order so you’re not waiting around all day. Homeowners in East Lake-Orient Park and the neighborhoods between them often see us within a day or two of calling for an estimate.
Serving Tampa, FL — Our Local Coverage Area
We’re based in the Tampa area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Installation in Tampa
Gate installation is the process of setting hinge posts, hanging a swing or slide gate, and, in the case of electric gates, running power, mounting an operator, and programming access devices. For home driveway gates, it usually includes grading, concrete work, and final safety testing. Kingston Gate Repair installs manual and automatic gates for homes and light commercial properties across Tampa.
Most residential gate installations take one full day once materials are on site. Custom fabrication adds one to three weeks for the gate to be built before the install day. Larger slide gates or double-leaf systems with heavy concrete work can run two days. We give you a completion window before we schedule.
A simple manual gate starts around $2,200, and an electric gate with an opener and access control typically runs $5,000 to $14,000 depending on size, materials, and the brand of operator. Steel gates with custom widths, cantilever slides, and intercom access push the project to the higher end. We provide a written, line-item quote before any work begins. Call (877) 752-3303 for your exact price.
Yes, we install and service LiftMaster, Mighty Mule, FAAC, and BFT openers, along with Ghost Controls, Viking, Linear, DoorKing, and Elite. We’re brand-agnostic, so our recommendation is based on your gate’s weight and cycle count, not on whatever we have in the truck. If you have one of these brands, we know its specific programming and failure modes.
If your gate is stuck open or won’t close, that’s a security issue, and we prioritize those calls. True emergencies, like a gate that has fallen off its track or an opener fire risk, get triaged first. For new installations, we schedule in order and give you a firm date. Call (877) 752-3303 and tell us what’s happening.
Operator warranties come from the manufacturer, typically covering the motor and control board for a specified period, and we file those claims for you if needed. Our installation labor is backed by our own workmanship commitment. If something we installed fails because of our work, we come back and make it right.
Clear vehicles and delivery bins out of the immediate work area, and make sure we have access to the electrical panel if you’re going electric. Trim back any shrubs or limbs that block the gate’s swing or slide path. We’ll mark out the hinge post locations before digging, so you’ll know exactly what’s happening and where.
Schedule Your Gate Installation Service in Tampa Today
A gate that fits your driveway and runs on an operator you can trust doesn’t happen by accident. Kingston Gate Repair handles the whole job, from the first site walk to the final programming. Call (877) 752-3303 today and tell us what you need. We’ll give you a free, no-obligation estimate, real prices, and a straight answer on what works for your property.
Written by Brent Holloway, Owner at Kingston Gate Repair, serving Tampa and surrounding communities.