Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Gandy, FL
Gate installation in Gandy means planning for salt air, a high water table, and hurricane season before the first post hole is dug. Kingston Gate Repair has served Gandy since 2013, installing automatic and manual gates on waterfront condos, 1960s ranch homes on oversized lots, and newer townhome developments across 33716. We’re a dedicated gate specialist, not a garage-door shop that dabbles in gates, so the technician who shows up already knows your operator brand and your neighborhood’s drainage patterns. For a free estimate on a new gate or a repair, call (877) 752-3303.
Why Gandy Homes Are Different
Gandy sits on reclaimed marshland at the edge of Tampa Bay, which means every gate job here starts with two realities: salt-laden onshore winds and a water table that rises into the posts. Galvanized hinges that last twenty years inland can rust through in eight here. Aluminum frames pit where the powder coat gets scratched by storm debris. Ground-level operator boxes flood during king tides, and after a summer squall we routinely find electric gate operators in low-lying yards tripped by water intrusion. The fix often includes raising the operator box onto a concrete pad, a detail that’s second nature to a Gandy technician but rarely needed a few miles inland.
The housing stock compounds it. Original wrought-iron and chain-link drive gates from the 1960s through the 1980s are common on the larger single-family lots. Newer bayfront condos and townhomes may have aluminum or vinyl, but the hardware on every one of them faces the same daily sea spray. We plan every installation around rust-proofing and elevation, because a gate that looks good in April has to survive a September storm surge.
Styles & brands we work with
Our Main Gandy Services
Most calls from Gandy homeowners fall into two camps: a gate that won’t open or close properly, and a gate that worked fine until the electronics got wet. Both need a technician who knows the specific operator and the local conditions.
Gate Repair in Gandy
Mechanical gate repair in Gandy covers everything from sagging hinges and rusted frame rails to wheels that bind on cracked concrete tracks. The salt air accelerates wear on ferrous hardware, and older wrought-iron gates on 1960s lots often need hinge replacement before the frame itself fails. We diagnose the full system, from the hinge to the latch, so a sagging gate doesn’t become a snapped weld or a stripped operator gear. Gate Repair in Gandy covers the full scope of mechanical work we handle across 33716.
Electric Gate Repair in Gandy
Electric gate repair in Gandy is where the local water table shows up most. Control boards corrode, actuators seize after salt intrusion, and ground-level operator boxes trip after heavy rain or storm surge. The most common pattern we see: a gate works fine for months, then a king tide or a tropical storm leaves the operator dead. We raise the box, replace the damaged board, and reseal the enclosure so it survives the next storm. Electric Gate Repair in Gandy details the electronics, loops, and actuator work we perform.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Gandy
New gate installation in Gandy is a different proposition than the inland suburbs. The reclaimed marshland means posts need deeper footings and better drainage than standard practice calls for, and every metal component needs corrosion protection rated for salt spray. We install driveway gates, pedestrian gates, and rear-yard gates on both the older single-family lots and the newer bayfront communities, and we plan each job around the property’s elevation and exposure. For the full walkthrough of new gate projects, see our Gate Installation service page.
Automatic Gate Installation
Signs you need it
You’re opening and closing a heavy gate by hand every day, or you want controlled access without leaving the car during Gandy’s afternoon downpours.
What it costs in Gandy
Automatic gate installation in Gandy typically runs $2,500 – $7,500 depending on the operator, gate weight, and whether we’re adding intercom or keypad entry.
How we do it
We set the posts with drainage-rock backfill, mount the operator on an elevated pad or pedestal, wire the control board, and test the full cycle with safety edges and loops.
Driveway Gate Installation
Signs you need it
Your current driveway gate is rusted through, sagging past the latch, or simply doesn’t match the security level you need now.
What it costs in Gandy
Driveway gate installation in Gandy typically runs $1,800 – $5,500 for a single swing or slide gate, with the higher end covering heavier steel and automatic operator integration.
How we do it
We measure the driveway opening, set reinforced posts below the water table line, hang or track the gate, and set the closing speed and force to match the operator.
What Gate Installation Costs in Gandy
| Item | Typical range in Gandy |
|---|---|
| Manual driveway gate (swing or slide) | $1,800 – $5,500 |
| Automatic operator with gate | $2,500 – $7,500 |
| Pedestrian or rear-yard gate | $800 – $2,500 |
How long does gate installation take in Gandy?
Most residential gate installations finish in one to two days. Custom slide gates or jobs that need concrete pad work for the operator can run three days.
Do I need an HOA approval for a new gate in Gandy?
Many Gandy communities do require design approval before a new driveway gate goes in. We can provide the spec sheet and elevation drawing your HOA will ask for. Call (877) 752-3303 and we’ll walk you through it.
Brands We Service in Gandy
Kingston Gate Repair is certified across nine gate-operator brands, and in Gandy we see a heavy concentration of Mighty Mule and LiftMaster on the residential side, with FAAC and BFT on the newer condominium and commercial systems. We stock common control boards, actuators, and remote kits for these brands locally so a diagnosis doesn’t end with a two-week parts wait. See the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Gandy, FL
| Service | Typical range in Gandy |
|---|---|
| Mechanical gate repair (hinges, tracks, latch) | $150 – $450 |
| Electric gate operator diagnosis and repair | $185 – $500 |
| Control board replacement | $300 – $850 |
| Actuator arm replacement | $350 – $900 |
| Manual driveway gate installation | $1,800 – $5,500 |
| Automatic gate installation | $2,500 – $7,500 |
| Pedestrian or rear-yard gate installation | $800 – $2,500 |
What pushes a Gandy quote to the higher end is usually sub-grade work: deeper footings near the water table, concrete pads to raise an operator above surge level, and corrosion-resistant hardware upgrades. Salt-air rust repair adds labor hours if the frame needs grinding and recoating before we align it. Every price is quoted and agreed before any work starts, so the invoice matches the number you approved.
Neighborhoods We Serve in Gandy
We cover all of 33716, from the bayfront condo communities along Gandy Boulevard to the older single-family streets further inland. Our techs carry parts for the operators common in each area, and we can usually schedule a visit within one to two business days.
- Gandy Boulevard corridor
- Bayfront condo and townhome communities
- 1960s – 80s single-family neighborhoods
- Waterfront lots along Tampa Bay
- Inland residential streets near the Gandy Bridge
Service Area – Cities Near Gandy
Beyond 33716, Kingston Gate Repair runs regular routes into the neighboring communities across the Pinellas side. Many of our Gandy customers have rental or investment properties nearby, and we coordinate service across them the same week. We also serve Feather Sound, FL, Lealman, FL, West and East Lealman, FL, and Pinellas Park, FL.
Serving Gandy, FL — Our Local Coverage Area
We’re based in the Gandy area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Gandy
Most Gandy calls are scheduled within one to two business days. We keep common Mighty Mule, LiftMaster, FAAC, and BFT parts on the truck, so a diagnosis usually ends with the repair completed the same visit.
Permit requirements vary by property type and whether the gate is automatic or manual. Automatic operators often need a safety inspection for the entrapment sensors. We handle the paperwork and coordinate the inspection for you.
Yes. We service both privately owned driveway gates and common-area gates managed by HOAs or property managers. For common-area work, we coordinate directly with the association so the repair happens without you playing messenger. Call (877) 752-3303 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Gandy Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Carrie Sullivan"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Rosa Garcia"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Amanda Hayes