Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Boyette, FL
Gate installation in Boyette usually costs between $2,800 and $9,500 depending on whether you’re adding a simple single-swing driveway gate or a full sliding gate with automation, and replacement of an existing gate typically lands between $1,800 and $4,200. What makes Boyette different from nearby Tampa suburbs is the housing stock: most homes were built between the 1990s and 2010s as part of master-planned communities with recorded HOA standards, so the gate you install has to match approved styles, finishes, and setback clearances or it gets flagged at the next community walkthrough. Kingston Gate Repair has served Boyette since 2013, and our technicians already know what those community standards require before they ever set foot in your driveway. Call (877) 752-3303 for a free estimate on any gate project here.
Why Boyette Homes Are Different
Boyette sits in the humid subtropical stretch of Hillsborough County where summer UV and afternoon thunderstorms work over metal gates in a way that surprises homeowners coming from other climates. Powder-coated aluminum and wrought-iron-style gates that looked sharp in 2008 are now showing rust at the weld points, faded finishes, and failing hinge bearings. We see the same pattern across the planned subdivisions here: the builder-grade operators installed when these homes went up have outlived their powder coat after a decade or more of Florida sun and rainy-season cycling, and the gate itself has started binding against the posts as the concrete slab shifts through wet-dry cycles.
The other thing that defines Boyette gate work is the HOA layer. Nearly every driveway gate, pool gate, and decorative entry gate on a home here is governed by recorded community standards. That means gate repair and replacement is as much about matching approved styles, finishes, and swing clearances as it is about fixing the hinge. A new gate that doesn’t match the one down the street can get rejected at the architectural review stage, which wastes weeks and money. We know the common Boyette specs because we work in these communities every week, and we help you get the right gate the first time so the HOA signs off without a second look.
Styles & brands we work with
Our Main Boyette Services
Most Boyette homeowners reach out to us for one of two reasons: a gate that has stopped moving or a gate that needs to be replaced to match community standards. Here is how each one works in this area.
Gate Repair in Boyette
When a gate starts dragging, squealing, or refusing to latch properly, the fix in Boyette usually comes down to the hinges, the posts, or the mounting hardware. A decade of humid air and afternoon storms does real damage to the pivot points, and once a hinge starts to wear, the whole gate shifts and the operator has to fight harder just to move it. We replace worn hinges, square up posts that have drifted, and get the gate moving cleanly again. For the full scope of what we handle on manual gates and mechanical failures, see Gate Repair in Boyette.
Electric Gate Repair in Boyette
If the operator hums but the gate does not move, or the gate opens halfway and reverses, you’re dealing with an electric or control-board issue. Boyette’s thunderstorm season puts real stress on control boards, and surge damage is one of the most common calls we get after a storm rolls through. We diagnose the board, the actuator arm, and the safety loops, and we carry parts for the major operator brands so we can fix most systems in the same visit. For details on what we repair and the brands we cover, see Electric Gate Repair in Boyette.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Boyette
Gate installation in Boyette is rarely a simple swap. The typical job here is replacing a builder-issued gate from the late 1990s or 2000s that has rusted through at the bottom rail or seized at the hinges, and it has to look like the approved design in the HOA’s documentation. Kingston Gate Repair has served Boyette since 2013, so we know the common community specs, and we handle everything from the first measurement to the final operator programming. For the full breakdown of what a new gate involves, see Gate Installation.
Automatic Gate Installation
Signs you need it
If you’re still getting out of the car to open your driveway gate in the rain, or your existing operator died and replacement parts cost more than a new unit, it’s time for a full automatic gate installation.
What it costs in Boyette
Automatic gate installation in Boyette typically runs $3,200 to $9,500 depending on gate width, operator type, and whether your HOA requires a specific style.
How we do it
We measure the opening, spec the gate and operator to match your HOA’s approved design, pour or anchor the posts, mount the gate, install the operator and safety edges, then program remotes and keypads with you standing right there.
Driveway Gate Installation
Signs you need it
If your existing driveway gate has rust-through at the bottom rail, sagged hinges, or a finish the HOA has flagged as non-compliant, a new driveway gate installation solves all three at once.
What it costs in Boyette
A new driveway gate installation in Boyette typically lands between $2,800 and $6,500 for a single-swing aluminum or steel gate without automation.
How we do it
We pull your community’s gate standards if they’re on file, confirm approved finish and swing direction, fabricate or order the gate to match, set the posts in concrete, hang the gate, and align hinges for a clean close.
Sliding Gate Installation
Signs you need it
If your driveway has a sharp slope or limited swing clearance, a sliding gate is the smarter layout, and many Boyette communities approve slide styles for wider lots.
What it costs in Boyette
Sliding gate installation in Boyette typically runs $4,500 to $9,500 including the track, gate, and operator depending on the width and material.
How we do it
We survey the driveway grade, set the track or cantilever system, install the gate panel, mount and wire the operator, and dial in the open and close limits so the gate stops exactly where it should.
What Gate Installation Costs in Boyette
| Item | Typical range in Boyette |
|---|---|
| Driveway gate (single swing, no automation) | $2,800 – $6,500 |
| Automatic gate installation (full system) | $3,200 – $9,500 |
| Gate replacement (existing opening) | $1,800 – $4,200 |
Does the HOA have to approve my new gate in Boyette?
In most Boyette communities, yes. Your recorded covenants usually require architectural review before a new gate goes in, and we help pull the approved specs and match the style, finish, and clearance so the review passes.
How long does a gate installation take in Boyette?
Most driveway gate installations take one to two days on site, depending on whether we’re pouring new posts and running power. Custom fabrication or HOA-approved finish matching can add lead time before the install day.
Brands We Service in Boyette
We work on Viking, Ghost Controls, DoorKing, and Elite operators in Boyette, plus five other major brands across our full coverage area. Our trucks carry common control boards, remotes, and safety edge components for these brands, so many repairs get completed the same visit. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Boyette, FL
| Service | Typical range in Boyette |
|---|---|
| Hinge repair or replacement | $180 – $550 |
| Gate sagging correction | $250 – $900 |
| Gate replacement (existing opening) | $1,800 – $4,200 |
| Driveway gate installation (no automation) | $2,800 – $6,500 |
| Automatic gate installation (full system) | $3,200 – $9,500 |
| Sliding gate installation | $4,500 – $9,500 |
| Operator replacement (residential) | $850 – $2,200 |
| Control board repair or replacement | $350 – $1,400 |
| Safety loop or edge replacement | $300 – $900 |
| Service call and diagnostic | $75 – $150 |
What pushes a Boyette gate repair or installation toward the top of these ranges is usually HOA finish matching, rust remediation on older gates, or storm-related electrical damage to the operator. Whatever the number, you get a written quote before any work starts, and we don’t change the price on you mid-job.
Neighborhoods We Serve in Boyette
We cover every Boyette subdivision along the 33579 corridor, including the master-planned communities between Bell Shoals Road and Boyette Road. Most repair calls in these neighborhoods get a technician out the same day or next morning.
- Boyette Springs
- Twin Lakes
- Waterleaf
- Riverleaf
- Pristine Lake Preserve
Service Area – Cities Near Boyette
Kingston Gate Repair also handles gate work in the surrounding south Hillsborough communities. If you’re just across the line in Riverview, FL, Gibsonton, FL, Bloomingdale, FL, or Fish Hawk, FL, the same team and the same brand coverage applies. Call (877) 752-3303 and we’ll confirm which technician covers your street.
Serving Boyette, FL — Our Local Coverage Area
We’re based in the Boyette area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Boyette
Most Boyette repair calls get a technician out the same day or the next morning. We schedule based on urgency: a gate stuck open or a failed operator gets priority because it affects security and daily access.
Permit requirements vary by community and gate type. Many HOA-governed subdivisions require architectural approval before installation, and some larger automatic gate projects need county-level review. We walk you through what applies to your specific street before we order anything.
Yes, and this is where our Boyette experience matters. We pull the recorded community standards if they’re on file, confirm the approved finish and swing direction, and help you select a gate that matches the approved design so the architectural review goes through without back-and-forth.
If your Boyette gate is sagging, seized up, or due for replacement, call Kingston Gate Repair at (877) 752-3303 for a free estimate. We know the communities, the climate, and the gate brands used here, and we’ll give you a straight answer and a written price before any work begins.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Boyette Customers Say
"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Alma Morales"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Katie Whitaker"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
— Diego Flores