Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Pinellas Park, FL | Kingston Gate Repair
Pinellas Park Gate Repair for Ghost Controls means two things at once: you need a technician who knows the operator’s logic, and you need one who knows what Pinellas Park’s salt air and 1950s – 1980s housing stock does to a swing gate. We’re Kingston Gate Repair, an independent Ghost Controls service provider, not a manufacturer affiliate. We stock the arms, control boards, and battery harnesses that fail most often here. Call (877) 752-3303 for a free estimate and we’ll diagnose it on site.

Why Pinellas Park Residents Choose Us for Ghost Controls Service
We work on Ghost Controls equipment every week across the 33780, 33781, and 33782 ZIPs, from single-swing Architectural Series openers on ranch-house driveways to solar-charged operators on retirement-community gates. Our lead tech, Brent Holloway, has spent nearly three decades working gates across the Tampa Bay area, and he’s seen the same Ghost Controls failure patterns repeat themselves in Pinellas Park over and over: corroded battery leads, binding arms from post heave, and remotes dead from oxidized terminals. Because we’re Ghost Controls sales & service specialists, the diagnosis is faster than a generalist walking in cold.
We’re a pure-play gate company. Every truck is stocked for gate work specifically, and our technicians diagnose Ghost Controls logic and mechanical faults daily. If you want the whole Pinellas Park service area covered, we handle it all: the ranch-house neighborhoods, the mobile-home parks, the retirement communities, and the small commercial lots.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in Pinellas Park
Here’s what we actually find when a Ghost Controls operator quits in Pinellas Park. This list reflects the failures we diagnose most often in this city’s climate and housing stock.
- Corroded battery leads and control-box terminals. Salt-laden Gulf air gets into the operator housing, and the battery harness develops oxidation that causes intermittent “low battery” faults even when the solar panel is clean. We replace the harness with a sealed connection and the fault clears.
- Swollen or dead battery backup. Ghost Controls solar-charged DC operators rely on a battery that lives outdoors in heat. After two or three Pinellas Park summers, that battery swells and won’t hold charge. We replace it with a properly rated battery and retest the solar input.
- Gate arm binding due to post heave or wind shifts. Summer thunderstorms push sustained gusts, and post footings in older mobile-home lots heave. The gate drifts out of alignment, the Ghost Controls arm binds mid-travel, and the controller reverses or trips the current-sense limit. Fixing the gate alignment is the repair; the operator is usually fine.
- Rusted-through bottom hinge and footing. In the 33781 and 33782 communities especially, we find galvanized tube gates rusted through at the lower hinge. The gate sags, the Ghost Controls operator strains against it, and the drive gear or arm bushing burns out. We fix the footing first, then the operator.
- Dead keypads, remotes, and phone-entry wiring. The operator runs fine, but the keypad or receiver at the gate post is dead. Pinellas Park’s humidity corrodes the push-button and receiver terminals. We test the wiring, replace the corroded components, and seal the connections.
Ghost Controls Service in Pinellas Park: What Local Conditions Mean for Your Equipment
There’s a pattern we see in the 33781 and 33782 ZIPs that’s hard to miss once you’ve done enough Ghost Controls calls. The older mobile-home and retirement-community lots in this part of Pinellas Park are full of galvanized and painted steel gates that have rusted through the bottom hinge and concrete footing. When a Ghost Controls operator “keeps failing” on one of those lots, the operator is usually fighting a failing post, not a failing board. We replace more post footings and lower hinges on Ghost Controls swing gates in Pinellas Park than we do in Ghost Controls service in Lealman and other neighboring cities with newer housing stock. That’s not a guess; it’s what our service logs show week after week. If your gate sags and the operator strains, the first thing a technician should check is the footing, and that goes double here.
We ran a call in a retirement community off 66th Street in the 33782 ZIP. A Ghost Controls Architectural Series single-swing operator kept reversing halfway open. The gate was a rusted-through galvanized tube gate with a heaved bottom hinge footing. We replaced the footing and hinge, realigned the gate, re-clamped the arm, then found corroded battery leads in the control box. Replaced the harness so the solar backup held charge through the next storm. The owner kept the same operator instead of replacing it, and the gate has run clean since.
Ghost Controls Models & Products We Service in Pinellas Park
We service the full range of Ghost Controls equipment found in Pinellas Park driveways and pool-enclosure gates: the Architectural Series (AXS) swing gate openers, the Heavy-Duty Series (TDS) dual-gate openers, the tube-gate operators used on chain-link and aluminum gates, and the solar-charged DC operators with battery backup. We use Ghost Controls OEM control boards, arms, and battery harnesses where the originals are still supported. For hinges, keypads, and receivers, we’ll recommend quality aftermarket parts when they hold up better in salt air. If your operator has a cracked housing, water intrusion, or a burned board and the gate is already fighting a failing post, we’ll tell you straight whether repair or replacement is the better long-term spend.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Pinellas Park
What you’ll pay depends on what failed. A service call with our diagnosis runs between $75 and $150. Replacing a battery or corroded battery harness typically adds $120 to $250. A new Ghost Controls control board replacement lands between $280 and $680. Realigning a gate and replacing a rusted hinge or footing runs $150 to $450. Installing a new battery backup system costs $300 to $600. Every quote is set and agreed before any work starts, and if the repair needs a part we don’t stock, we’ll order it and give you a clear timeline. Call (877) 752-3303 for an exact quote, and the estimate is free.
- Service call and diagnosis: $75 – $150
- Battery or battery-harness replacement: $120 – $250
- Ghost Controls control board replacement: $280 – $680
- Gate realignment and hinge/footing repair: $150 – $450
- Battery backup installation: $300 – $600
Serving Pinellas Park, FL — Our Local Coverage Area
We’re based in the Pinellas Park area and know this community well, and we also provide Feather Sound Ghost Controls service. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Pinellas Park
The most common cause we find in Pinellas Park is corrosion on the battery leads or terminals inside the control box, not a failed panel. Salt air and humidity get into the housing and create resistance at the connection. We clean or replace the harness, retest the charge path, and the fault clears. Call (877) 752-3303 and we’ll diagnose it on site.
Usually it’s the gate. In Pinellas Park, summer wind gusts and post heave knock swing gates out of alignment, and the Ghost Controls arm binds mid-travel. The controller reverses or trips the current-sense limit as a safety response. We realign the gate, check the hinge and footing, and the operator usually returns to normal without a board replacement. Call (877) 752-3303 to schedule a diagnosis.
Yes. We service keypads, remotes, and phone-entry wiring across the 33781 ZIP. Pinellas Park’s humidity eats the push-button and receiver terminals at the gate post. We test the wiring, replace the corroded components, and seal the connections so remotes and entry systems work reliably. Call (877) 752-3303 for an estimate.
It depends on the gate’s condition. If the operator itself has a sound board and the failure is a bad battery, corroded leads, or alignment, repair is usually the smarter spend. But if the gate is rusted through at the bottom hinge or the post footing is heaving, we’ll say so plainly: fix the post and realign, or replacement may cost less over time. Call (877) 752-3303 and we’ll give you an honest read.
Yes. We install and repair Ghost Controls solar-charged DC operators with battery backup, and we can upgrade an existing AC unit with battery backup so your gate still operates during hurricane-season power loss. We size the battery and test the solar input to match your gate’s weight and usage. Call (877) 752-3303 to talk through the options and a free estimate.
Service Areas Near Pinellas Park
We also run Ghost Controls calls in Tampa, Palm River-Clair Mel, East Lake-Orient Park, Egypt Lake-Leto, and Carrollwood. If you’re a few minutes outside Pinellas Park and your Ghost Controls opener is acting up, call us anyway. We cover Ghost Controls service in Fish Hawk and Ghost Controls service in West and East Lealman, and we’ll let you know if we can reach your address.
Book Your Ghost Controls Service in Pinellas Park Today
If the gate isn’t working right, there’s a reason, and finding it fast is the whole job. Call (877) 752-3303 and we’ll send a Ghost Controls technician to your Pinellas Park property, or to our Ghost Controls service in South Highpoint if that’s closer to you. Free estimates, same-day emergency visits when we have a tech nearby, and the repair is quoted before we start.
Written by Brent Holloway, Owner at Kingston Gate Repair, serving Pinellas Park since the company opened its local service route.