Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Temple Terrace, FL | Kingston Gate Repair
Ghost Controls gate repair in Temple Terrace comes down to two things: diagnosing the operator itself, and understanding what the gate is mounted to. We provide independent Ghost Controls service across Temple Terrace, and the one thing that makes our work here different is that we don’t just swap boards, we trace the fault back to what Florida humidity and aging pillar footings actually do to these systems. Call us at (877) 752-3303 and we’ll tell you straight what’s wrong.

Why Temple Terrace Residents Choose Us for Ghost Controls Service
We work on Ghost Controls swing and slide operators every week in Temple Terrace, so we know how their control boards, limit settings, and battery-backup behavior actually fail in Florida humidity, not just how they’re installed new. We’re an independent gate repair company, not affiliated with or authorized by Ghost Controls, and we diagnose the operator on its own terms before recommending repair or replacement. If the gate isn’t working right, there’s a reason, and finding it fast is the whole job. Brent Holloway, our owner, has spent the better part of three decades working gates across the Tampa Bay area, and he built this company around one principle: a technician who already knows your operator beats one who’s learning on your driveway. For Temple Terrace homeowners off Riverhills Drive or along the golf course sections, that means a Ghost Controls problem gets found the first trip, not the third.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in Temple Terrace
- Control board and battery-harness corrosion after humid summers and storm-driven rain. Operators that test fine dry will fault intermittently once the enclosure is wet. We see this constantly in Temple Terrace, where subtropical humidity creeps into every seal and connector.
- Limit and soft-start/soft-stop settings drifting out of adjustment on older custom iron swing leaves. The arm strains against a stop or reverses mid-travel. On Temple Terrace’s decades-old custom gates, the operator often isn’t the root cause, it’s reacting to a gate that has shifted.
- Swing arm and tube-gate mounting hardware loosening or rusting where the gate has shifted on a root-heaved or settling post. The load transfers to the operator instead of the hinge, and Ghost Controls arms take that abuse until something gives.
- Solar and battery-backup systems failing to hold charge through weeks of heavy afternoon cloud cover. Temple Terrace gets serious summer storm cycles. A solar-compatible Ghost Controls opener that worked in spring can be dead by August if the battery has degraded.
- Ghost Controls slide gate openers dragging or faulting on tracks fouled by sand and organic debris. Slide gates in Temple Terrace collect everything the oaks drop, and a TSS series operator pushing against a clogged track will burn through limit switches faster than it should.
Ghost Controls Service in Temple Terrace: What Local Conditions Mean for Your Equipment
Here’s what makes Temple Terrace different from every neighboring city: Temple Terrace is one of Florida’s first planned golf-course communities, and its mature oak-canopied lots in 33617 mean gate repair here is rarely a simple swap. It’s matching or reinforcing older custom iron and aluminum driveway gates that were installed decades ago and now fight root-heaved posts and humid, storm-driven corrosion. In the old golf-course sections, original wrought-iron gates are often anchored to aging brick or coquina-style pillars, so a sagging gate usually means re-setting the pillar footing, not just adjusting the hinges. For Ghost Controls owners, this creates a specific pattern: a dual swing operator that keeps tripping its limits or reversing halfway open is often reacting to a pillar footing that has settled, rather than to anything wrong with the board. We’ve learned to check the gate’s plumb before we condemn the operator. On a canopied lot off the old Temple Terrace Estates core in 33617, a homeowner’s Ghost Controls dual swing operator kept reversing halfway open on a heavy custom iron driveway gate hung on an aging brick pillar. We found the pillar footing had settled and thrown the leaf out of plumb, so we re-set and braced the footing, realigned the hinges, then reset the operator’s limits and soft-stop, the gate now runs the full travel without faulting. We also replaced a corroded battery harness and confirmed backup hold time before we left.
Kingston Gate Repair handles the full Ghost Controls sales & service picture, from diagnosis to install. We’re gate specialists across nine brands including LiftMaster, FAAC, BFT, Linear, Viking, DoorKing, Elite, and Mighty Mule, but Ghost Controls holds a particular place in our service calls because so many Temple Terrace homes run them on older custom gates.
Ghost Controls Models & Products We Service in Temple Terrace
We service the full Ghost Controls lineup you’ll find on Temple Terrace driveways: the Heavy-Duty Dual Swing Gate Opener (TDS series), the Single Swing Gate Opener (TS series), the Slide Gate Opener (TSS series), and solar-compatible swing operators with tube-gate arm mounting. Our approach to parts is simple: we use Ghost Controls OEM boards, arms, and harnesses where the operator is still supported, and proven aftermarket batteries and hardware where OEM adds cost without benefit. That keeps your repair honest. When the control board is corroded and the gate itself is sound, we repair the operator. When the gate leaf or post is the real problem, we fix that first rather than selling you a new motor. Most common Ghost Controls parts are on our trucks for same-day Temple Terrace service.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Temple Terrace
Ghost Controls repair in Temple Terrace typically runs $165 to $420 depending on what failed and whether it’s a board, battery harness, limit reset, or mounting hardware replacement. A corroded control board replacement on a TDS series operator usually lands toward the higher end. A battery replacement or limit adjustment on a TS series sits at the lower end. If the gate itself, the pillar, or the hinge post is the real problem, that work gets priced separately and we walk you through it before we touch anything. Every estimate is free, and the price is quoted and agreed before any work starts. Call (877) 752-3303 and we’ll give you a straight number.
Serving Temple Terrace, FL — Our Local Coverage Area
We’re based in the Temple Terrace area and also provide Ghost Controls in East Lake-Orient Park, so we know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Temple Terrace
Not necessarily. In Temple Terrace, a Ghost Controls swing gate that reverses mid-travel is often reacting to a gate leaf that has been thrown out of plumb by a settling brick or coquina pillar footing. We check the gate’s alignment and hinge load before we condemn the operator. Call (877) 752-3303 and we’ll diagnose it properly.
Because moisture is getting into the enclosure. Temple Terrace humidity and storm-driven rain corrode battery harnesses and board connections over time, and an operator that tests fine dry will fault intermittently once it’s wet inside. We replace the corroded harness or affected components and seal the enclosure properly.
Only if the battery actually holds a charge. In Temple Terrace’s summer storm cycle, solar and battery-backup systems degrade faster than homeowners expect, especially after weeks of heavy afternoon cloud cover. We test the hold time and replace the battery when it’s cooked. Call (877) 752-3303 for a free estimate on backup service.
Yes, and this is one of the most common calls we get in Temple Terrace’s original golf-course sections. The operator itself may be fine while the pillar footing has settled and thrown the gate out of alignment. We re-set and brace the footing, realign the hinges, then reset the operator’s limits and soft-stop so the whole system works together.
We do. Kingston Gate Repair services nine gate brands across residential and commercial systems, including Ghost Controls in University, so if your property has a Ghost Controls swing gate at the driveway and a DoorKing operator at the back entrance, one tech handles both. That’s the benefit of being a gate-only shop.
Service Areas Near Temple Terrace
We provide Ghost Controls repair throughout Temple Terrace service area and the surrounding neighborhoods: Tampa, Palm River-Clair Mel, East Lake-Orient Park, Egypt Lake-Leto, Progress Village, and Carrollwood. If you’re just outside Temple Terrace, ask, we’re likely already covering your street. We also extend to Ghost Controls service in Gibsonton and Ghost Controls service in Town ‘n’ Country.
Book Your Ghost Controls Service in Temple Terrace Today
If your Ghost Controls operator is faulting after storms, reversing mid-travel, or dead after an outage, call us at (877) 752-3303 — we also offer Ghost Controls service in Pebble Creek. We’ll schedule a Temple Terrace service call and give you a free estimate. Emergency repair availability is offered for urgent gate failures.
Written by Brent Holloway, Owner at Kingston Gate Repair, serving Temple Terrace, Ghost Controls in Thonotosassa, and the greater Tampa Bay area.