Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Temple Terrace
Electric gate repair in Temple Terrace usually costs $185 – $420 for a service call and diagnosis, with most same-visit repairs landing between $260 and $580 depending on the part and the gate’s age. We’re Kingston Gate Repair, and we work on gates throughout the 33617 area every week, including the older Estates section where gates were often custom-built years before any operator was bolted on. When a Temple Terrace gate stops responding, won’t close, or drags across the driveway, call (877) 752-3303 and we’ll get a gate specialist out to look at it.
Why Kingston Gate Repair Is Temple Terrace’s Preferred Electric Gate Repair Company
We’ve repaired enough gates in 33617 to know that this zip code throws problems at you that a newer subdivision never will. Temple Terrace’s original golf-course neighborhoods are full of heavy, custom-welded iron and aluminum gates hung on brick or coquina-style pillars, and those gates were built before modern operator mounting standards existed. That means a Temple Terrace gate job is rarely a parts swap; it’s a diagnosis of the gate, the operator, and often the pillar footing underneath both.
Our lead technician, Brent Holloway, has spent years working on exactly these systems. He’s the one property managers call when a Electric Gate Repair call has already been misdiagnosed once by a generalist. We carry control boards, loop detectors, safety photocells, remotes, and keypads for the brands most common in Temple Terrace, so most calls are completed in one trip rather than one trip plus a return visit.
Styles & brands we work with
Gate Access Control in Temple Terrace
Gate access control in Temple Terrace often involves integrating an older custom gate with a modern entry system, which is a different job than simply replacing a keypad. In the Estates core especially, homeowners want the original gate to stay, but they need it to work with phone-based entry, visitor codes, and cameras without butchering the original ironwork. That’s the kind of integration work we handle regularly across 33617.
A full access-control retrofit, including a new keypad, intercom module, and control board, typically runs $700 – $1,400 in Temple Terrace. If the job only involves adding a stand-alone keypad or replacing a failed entry keypad, that’s usually $220 – $380 installed.
Keypads and Intercom Integration
We wire keypads and intercom systems into LiftMaster, FAAC, and BFT control boards daily. On Temple Terrace gates, the common failure point is corrosion inside the keypad housing from humidity and storm exposure, not the button membrane itself. We open, clean, and re-seal housings before installing the new unit so the replacement doesn’t rot out in two years.
Vehicle Detection and Loop Systems
Driveway loops and probe sensors fail often in Temple Terrace, especially after summer lightning or when tree roots shift the saw-cut loop in the asphalt. When a gate won’t open for an arriving car but works fine on the remote, the loop detector is usually dead. We test the detector, the loop wire, and the operator input separately so we replace the failed piece, not the whole system.
Commercial Gate Operator in Temple Terrace
Commercial gate operators in Temple Terrace run on a different duty cycle than residential units, especially at apartment communities and office complexes along Fowler Avenue and the golf-course perimeter roads. A gate that cycles 200 times a day cannot be repaired with residential-grade parts and expected to last. We service and replace commercial operators for the property managers and HOAs in 33617 who can’t afford a gate that’s down for half a day.
A commercial slide-gate operator replacement in Temple Terrace typically runs $1,500 – $3,200 depending on the voltage, the gate weight, and whether we’re reusing the existing chain or rack. Commercial swing operators run slightly less, usually $1,200 – $2,600 installed.
High-Cycle Swing and Slide Operators
For properties with heavy daily traffic, we recommend and install operators built for continuous duty. We stock and service professional-grade FAAC, BFT, and DoorKing commercial units, and we size the operator against the actual gate weight and cycle count, not just the manufacturer’s placard. An under-specified operator is the most common reason a Temple Terrace commercial gate fails within a year of installation.
Access Control for Gated Communities
We handle the gate operator and the access-control layer together, because they share a control board. On gated Temple Terrace communities, we retrofit existing slide gates with telephone-entry systems, keypad pedestals, and photo-eye safety edges while keeping the gate itself. That avoids a six-figure gate replacement when the actual failure is a $700 control board.
Trusted Brands We Service in Temple Terrace
We service LiftMaster, FAAC, BFT, and Mighty Mule operators regularly in Temple Terrace, and we keep the parts for those brands stocked for 33617 calls. That means we’re not ordering a FAAC control board from a distributor and making you wait three days; we carry it. Brent Holloway is qualified across all of those brands, so the technician you get already knows the menu structure, the fault codes, and the quirks of your specific operator.
Common Electric Gate Repair Problems We See in Temple Terrace Homes
- Pillar-footing failure on old Estates gates. The gate panel sags and drags not because the hinges are bad, but because decades of irrigation and root growth shifted the brick pillar it hangs from. We re-set the footing or install a steel receiver plate, then correct the hinge alignment before touching the operator.
- Humidity-driven corrosion on hinges and racks. Temple Terrace’s afternoon thunderstorms and high humidity seize steel hinges and corrode rack-and-pinion tracks on slide gates within a few years. A seized hinge forces the operator motor to work against resistance until the gear or the board fails.
- Lightning damage to control boards and loop detectors. Summer storms in Temple Terrace knock out FAAC and LiftMaster control boards, keypads, and vehicle-loop detectors with regularity. We stock common replacement boards specifically because this failure pattern repeats every storm season.
- Safety photocell misalignment on older installs. On older Temple Terrace gates, the photocells were often mounted to the gate leaf or a post that has since shifted. A beam that falls out of alignment shuts the gate down or causes it to reverse mid-cycle, and the fix is repositioning and re-aiming the sensor, not replacing the operator.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Temple Terrace, FL
Our service call and diagnosis in Temple Terrace runs $185, and that fee is credited toward the repair if you approve the work. A keypad replacement is typically $220 – $380, a safety photocell pair runs $160 – $280, and a control board replacement lands between $450 and $950 depending on brand and model. Motor or full operator replacement on a residential swing gate starts around $850 and goes up based on gate weight and duty cycle. We quote the exact price before any work starts, so the number on the invoice is the number you approved. Call (877) 752-3303 for a free estimate.
We Also Serve Cities Near Temple Terrace
Kingston Gate Repair is based in Tampa and serves the entire Temple Terrace area, plus nearby East Lake-Orient Park, University, Pebble Creek, and Thonotosassa. If your gate is down and you’re on the edge of 33617 or one of the surrounding communities, call us and we’ll confirm coverage and schedule you in.
Serving Temple Terrace, FL — Our Local Coverage Area
We’re based in the Temple Terrace area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Temple Terrace
Sometimes, but not usually. In Temple Terrace’s older Estates sections, sagging iron gates are anchored to brick or coquina pillars that have shifted after decades of irrigation and root growth. Adjusting the hinges without fixing the footing buys you a few months at best. We assess the pillar base first; if the footing has moved, we re-set it or install a steel receiver plate, then dial in the hinges so the gate swings clean. Call (877) 752-3303 and we’ll tell you honestly which fix applies to your gate.
Yes. Every automatic gate in Temple Terrace should have functional safety photo-eyes or an equivalent monitored safety edge on the leading edge of the gate leaf, and on a swing gate the closing path needs protection too. It’s a safety requirement, not an option, and an improperly aligned or bypassed photocell is the most common cause of a gate that reverses or refuses to close. We stock compatible photo-eye sets for LiftMaster, FAAC, BFT, and Mighty Mule operators.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators across 33617. That covers everything from an entry-level Mighty Mule on a backyard gate to a heavy FAAC commercial swing operator on a gated estate. We don’t swap in whatever brand we happen to carry; we repair the operator you already have.
In Temple Terrace, the usual causes are a corroded rack or a failed wheel bearing that creates extra drag, a damaged safety edge or photocell that’s sending a false obstruction signal, or a control board that’s losing its limit memory after a storm surge. We check the mechanical drag first, because a gate that’s fighting rust takes out operator boards fast. Then we test the safety circuit and the board separately so we replace the actual failed component. Call (877) 752-3303 and we’ll walk you through what we’re seeing.
Yes, and this is one of our core service categories in Temple Terrace. We replace and integrate keypads, telephone-entry intercoms, and vehicle-loop detection on estate gates throughout the 33617 area, including retrofitting older custom gates for phone-based entry without altering the original gate structure. A full access-control retrofit on an estate gate typically runs $700 – $1,400 depending on the entry system and operator integration.
Call Kingston Gate Repair for Electric Gate Repair in Temple Terrace
If your gate is sagging, stuck, or dead, call us at (877) 752-3303. We’ll send a gate specialist to your Temple Terrace property, diagnose the failure honestly, and give you a firm written price before any work begins. We quote the job upfront, stock the parts in our trucks, and stand behind the repair. For gate repair in Temple Terrace, call Kingston Gate Repair today.
Written by Brent Holloway, Owner at Kingston Gate Repair, serving Temple Terrace and the greater Tampa area.